Reasons Your Heating System May Not Keep Your Home Warm

You might be shivering inside your home because of a problem with the heating system, or it could be your home itself. Any one or several of these problems could be contributing to cold temperatures indoors.

Check the Furnace

• Look for signs of ductwork leaks. Dusty areas around the registers or nearby walls or rooms that are colder than others often indicate ductwork problems. A segment of the ducts might be obstructed, blocking the airflow. If you can access them, look for ductwork damage, tears, or detached segments.

• Check the thermostat. The thermostat may not turn the furnace on when needed, or shut it off before it reaches its target temperature. Its batteries could be dead, or the thermostat needs replacing.

• The furnace needs repair. Furnaces use safety switches that will turn them off when they are overheating or malfunctioning. There could be a problem with the ignition system, or the blower motor.

An HVAC technician can diagnose and fix the heating system problems, whether they’re associated with the ducts or the furnace itself.

Look Over Your Home

• The lack of insulation and air leaks in the home’s envelope might be responsible for the cool indoor temperatures. Over time, insulation can disintegrate and air leaks form. Damp or compressed insulation loses its ability to slow heat loss.Builders often use caulk to seal around exterior door and window frames. Over time, caulk shrinks and dries out, losing its effectiveness. You may need to reapply it, or replace old door weatherstripping.

• Windows might be the culprit. As your home settles, the windows may not fit as tightly in their frames. For the best protection against drafts, lock each window. You can also put draft blockers at the base of windows to block cold air.If new windows aren’t in your plans, install clear plastic window sealing kits, available online or at home improvement centers.

Whether it’s problems with your home or the heating system, an HVAC contractor can help you find the issues and promptly fix them. To learn more, contact Air Assurance, providing HVAC services for Broken Arrow homeowners.

Our goal is to help educate our customers in the Tulsa and Broken Arrow, Oklahoma area about energy and home comfort issues (specific to HVAC systems). For more information about heating system and other HVAC topics, call us at 918-217-8273.

If This Winter Taught Us Anything, It Was The Importance Of Insulation

Oklahoma residents have seen their fair share of snow, ice and cold temperatures this winter. The season called to mind the importance of being prepared for storms and respecting nature’s fury. Most of all, it’s probably taught you the value of your home’s insulation.While insulation falls into the category of “out of sight, out of mind,” it remains absolutely necessary for maintaining a warm, comfortable home. Not only that, energy efficiency increases with proper insulation, which directly impacts your heating and cooling bills. With the right amount and the proper installation of insulation, you can potentially save about 20 percent on your total heating and cooling utility bills.To get the maximum efficiency and comfort, you have to have the right kind and the right amounts of insulation. Insulation is rated according to “R-Value,” which indicates how well the insulation restricts the flow of heat from inside your home to the outside. Higher R-values mean that insulation has a greater ability to restrict the flow of heat.The majority of Oklahoma residents live in zone 3 for R-value, according to the U.S. Department of Energy. In this zone, homeowners should use different types of R-value insulation for various areas of an existing home:

• Attic, uninsulated: R30-R60

• Attic with existing insulation: R25-R38

• Floors: R19-R25

• Walls: R5

Most homes should have insulation in the following areas:

• Unfinished attics

• Exterior walls

• Floors that are directly situated above (unheated) garages and crawl spaces

• Spaces surrounding all windows and doors.

To figure out how much insulation your home needs, you should first determine how much existing insulation you have. Use this equation:(Thickness in inches) x (R-value in one inch) = Insulation’s R-value TotalNow, you can calculate how much insulation you need to add, using this equation:(R-value recommended for your zone) – (existing R-value Total) = The amount of R-value you need to add.If you’re unsure about your home’s insulation, the professionals at Air Assurance are happy to assess your home’s insulation and offer recommendations for improvement. Now is the time to prepare for next winter.Our goal is to help educate our customers about energy and home comfort issues (specific to HVAC systems).  For more information, click here. Air Assurance services Tulsa, Broken Arrow and the surrounding areas. To get started, check out our website or see our current promotions.