Signs You're Overworking Your System

An overworked HVAC system will cost you in higher energy costs and repair bills. These situations might help you discover if your system is working harder and costing you more than it should.

It runs in brief spurts.

Few things harm a central air conditioner more than short running cycles. The frequent starts stress all the parts, but the compressor and the motors bear most of the burden. When A/C equipment first starts up, it requires a lot of electricity to run.

The frequent bursts of electricity wear these parts out faster. They use more energy and will fail faster. To avoid equipment that runs in short cycles, insist on having a load calculation performed on your home before you install new HVAC equipment. Oversized systems are not better when it comes to cooling and heating equipment.

Filter changes are infrequent.

Running your system with a clogged air filter will overwork it. The airflow slows through the air handler and the ductwork. As a consequence, it takes longer to cool your home, which increases the wear and tear on all its parts.

Running it with low airflow often causes the coil inside the air handler to freeze. If your system continues to run, it could burn the compressor out, which is the A/C’s most expensive part.

Your electric bills are high.

Steadily rising energy consumption often indicates an overworked system. If you’ve eliminated obvious causes like ductwork leaks or a dirty air filter, your system may be showing the signs of an overworked HVAC system.

It requires frequent repairs.

If it seems like your system needs repairing often, it may be overworked. While oversized equipment is the primary cause of system problems, the opposite might contribute as well. If it’s too small for your home, it will have to run in cycles longer than the manufacturer intended, which will shorten its lifetime.

The experts at Air Assurance can help you discover if you have an overworked HVAC system to help you avoid excessive energy and repair costs. We provide trusted HVAC services for homeowners in the Broken Arrow area.

Our goal is to help educate our customers in the Tulsa and Broken Arrow, Oklahoma area about energy and home comfort issues (specific to HVAC systems). For more information about other HVAC topics, call us at 918-217-8273.

It's Almost Off Season for Your Air Conditioner. Here's How to Get it Ready

When the sweltering Oklahoma summer finally winds down, it is time to start getting the home ready for cooler weather. At the top of your fall home maintenance list, make sure you include preparing your air conditioner for the off-season.Here is how to care for your A/C during fall and winter so it runs well next spring.

Have it Checked

Schedule a maintenance visit from your HVAC technician , who can check for any problems that might have developed over the summer. This gives you extra time to schedule repairs during the cold months when you don’t need to use the air conditioner.

Change the Filters

Leaving dirty filters in the system allows mold growth and potential airflow issues. Don’t forget to change all of the air filters. This is one of the easiest maintenance tasks for the homeowner, but it is also commonly forgotten.

Clean the Coils

Dirty coils can lead to serious problems such as frozen coils, which can cause the air conditioner to stop working. To clean the coils yourself, you will need coil cleaner and a special fin brush. Remember to turn off all power to the A/C system before doing these maintenance tasks. Alternatively, ask a technician to clean the air conditioner for you.

Clean Around the Outdoor Unit

Leaves, dirt and other debris collecting around or on top of the unit attract mold and pests, invite rust, and obstruct airflow. Turn off the air conditioner and brush away all of this debris. You can use your garden hose to rinse off excess dirt and debris as well.Rake the ground around the unit and trim all grass or bushes nearby. Fall leaves will probably continue to collect around the unit, so consider this cleanup as an ongoing task.

Cover the Outdoor Unit

Cover the outside unit with an A/C cover when it is no longer in use. This protects it from winter storms.For more about getting your home’s air conditioning system ready for the off-season, please contact us at Air Assurance today.

Our goal is to help educate our customers in the Tulsa and Broken Arrow, Oklahoma area about energy and home comfort issues (specific to HVAC systems). For more information about air conditioners and other HVAC topics, call us at 918-217-8273. Credit/Copyright Attribution: “Peggy_Marco/Pixabay”

What Is Microbiocide (BBJ) And How Can It Help Indoor Air Quality?

Operating costs for heating and air conditioning systems continue to rise year after year. So, we make sure our homes are sealed and insulated, weatherstripped and caulked, in order to reduce the infiltration of outside air and the loss of our precious, indoor conditioned air. That saves us money; but, it also creates another problem.Indoor air quality in homes is the new problem. The air we use gets circulated and filtered and we think all is well. Filtration is a tremendous help; the problem is that mold, mildew and bacteria can live in our homes with us. As they breed, their presence can cause allergies to flair and can contribute to other, more serious, respiratory conditions. Poor indoor air quality has become the price we pay for keeping our homes tight, more comfortable and for reducing our energy costs.When pollutants and contaminants leave our home to be filtered they travel through the duct system. Not all bacteria and mold spores go to the filter. Many cling to the ducts and other components in our heating and air conditioning system. As they breed, their numbers increase and they become unwelcome guests in our homes. They can live on anything that provides a comfortable, humid environment. The biggest example of where mold growth can occur is in our air conditioning evaportator coils.  This is most likely the darkest, wettest, area in the home, which provides an ultimate safe harbor for these culprits to live, eat, and reproduce.  A product that can fight mold and mildew in our home air ducts and coils is MicroBiocide.Microbiocide is a harmless chemical thats been approved by the EPA, to help reduce mold and other contaminants in our home comfort system. A treatment with this approved organic chemical can substantially improve the indoor air quality of any home.Reducing microbial irritants in the ducts can reduce duct odors, inhibit the spread and growth of mold colonies and greatly reduce allergens in the indoor air.  Not only that, but by reducing these things that attach themselves to the coils, airflow and temperature transfer is less inhibited, therefore allowing your system to cool or heat more efficiently.Get more information on reducing mold and mildew and increasing the healthy level of indoor air quality by going here. For other information regarding the maintenance of quality indoor air for your family, log onto Air Assurance. We want everyone to enjoy both home comfort at the lowest possible cost and clean, healthy indoor air.Our goal is to help educate our customers about energy and home comfort issues (specific to HVAC systems).  For more information, click here. Air Assurance services Tulsa, Broken Arrow and the surrounding areas. To get started, check out our website or see our current promotions.